#include "modules/usb/usb_task.h"
#include "usb_descriptors.h"
Include dependency graph for usb_standard_request.h:
This graph shows which files directly or indirectly include this file:
Go to the source code of this file.
Defines | |
| #define | ATTACHED 0 |
| #define | POWERED 1 |
| #define | DEFAULT 2 |
| #define | ADDRESSED 3 |
| #define | CONFIGURED 4 |
| #define | SUSPENDED 5 |
| #define | USB_CONFIG_ATTRIBUTES_RESERVED 0x80 |
| #define | USB_CONFIG_BUSPOWERED (USB_CONFIG_ATTRIBUTES_RESERVED | 0x00) |
| #define | USB_CONFIG_SELFPOWERED (USB_CONFIG_ATTRIBUTES_RESERVED | 0x40) |
| #define | USB_CONFIG_REMOTEWAKEUP (USB_CONFIG_ATTRIBUTES_RESERVED | 0x20) |
| #define | USB_STATUS_REMOTEWAKEUP 0x02 |
| #define | USB_REMOTE_WAKEUP 1 |
| #define | Is_device_enumerated() ((usb_configuration_nb!=0) ? TRUE : FALSE) |
| Returns true when device connected and correctly enumerated with an host. | |
| #define | Is_device_not_enumerated() ((usb_configuration_nb!=0) ? FALSE : TRUE) |
Functions | |
| void | usb_process_request (void) |
| This function reads the SETUP request sent to the default control endpoint and calls the appropriate function. | |
| void | usb_generate_remote_wakeup (void) |
| This function manages the remote wakeup generation to wake up the host controlle. | |
Variables | |
| U8 | usb_configuration_nb |
| Public : (U8) usb_configuration_nb Store the number of the USB configuration used by the USB device when its value is different from zero, it means the device mode is enumerated Used with USB_DEVICE_FEATURE == ENABLED only /. | |
| U8 | remote_wakeup_feature |
This file contains the USB endpoint 0 management routines corresponding to the standard enumeration process (refer to chapter 9 of the USB specification. This file calls routines of the usb_specific_request.c file for non-standard request management. The enumeration parameters (descriptor tables) are contained in the usb_descriptors.c file.
Definition in file usb_standard_request.h.
1.5.1-p1